Magic Reed Oboe Cane

Cane Selection and Processing-  Tips For Best Results:

​​1) If you find a source of great cane (especially in tube form), buy as much as you can afford as quickly as you can.  Due to climate changes from one year ago, this is likely to be the best year for at least a couple of years to come.  We are planning for this.

2) Consider your own climate, altitude, seasonal changes, (and of course personal preferences) when choosing a strength and diameter.  Most oboists need at least two strengths of cane for their annual needs, and need at least some harder cane (like mine) in their inventory.  High, dry climates usually require cane with around a 10.0 diameter while players in normal altitudes and damper climates can order up to 11.0 depending on preference and the size of their gouger bed. 

3) Magic Reed cane is denser/more tightly fibered cane than what is generally available today, and you may need to adjust your routines a little to get your best result.

    •     When you buy new cane, you should not be on auto-pilot. Sample your order to learn about its properties.  Make 10-12 reeds and mark the reeds by hardness, gouge and shape.  Record your results.  If you have a dial micrometer, diagram your best current reed.  Then, diagram a great reed you make on your new cane. Compare the results.  You may be surprised.  Keep notes. Act like a scientist.

    •    Once you have a game plan, sort, separate, and label by wall thickness, diameter, final gouge.  Continue to keep track of what shapes work best.  Every step gives you more and more information and you should keep all of your best cane together as your go-to stock for concerts..  You be the judge.  Everyone is different.  Discard any cane that has a low probability of success.   Your time is valuable, and reed making is hard enough without wrestling cane that has no business in your inventory.

4) Get the feel of the cane in your pre-gouger, gouger, through your flex tests and with your knife.  Get a sense of the range of attributes.

5) If you only have one gouger, get one with a variable setting if you want a very consistent thickness.  There are often variation in the gouge that arise from small differences in diameter.  When you do gouge, select one specific cane diameter  at a time (not a diameter range).  This way, you can more efficiently adjust your gouger to improve consistency.   If you do not have a variable gouge, consider gouging some wet and some dry.  Find happy homes for cane that has a diameter larger than your gouger bed (a good reason for an 11 mm bed).

6)  Do not press down on the gouger.  It is designed to take off ribbons of specific thicknesses.  Pressing down will only compress the cane (and never evenly), leading to an inconsistent gouge across the length of the slip.  Avoid gouging on your lap because it promotes pressure.  If an easy touch doesn't do the job, it is probably time to sharpen your blade.

7) Have two different sized (but closely matched) shaper tips. Matching the shaper size to the diameter of the cane will help to control the size of the aperture.

8) Pre-gouged canes are fine for long-term storage.  Gouged cane should probably be used within 6 months, and before major seasonal changes.  Cane that is completely processed almost always has a diameter that is larger than it measured on the tube.

 If you would like specific suggestions for your own situation or would like to add to my list, please feel free to contact us.

Follow these instructions to get less of--------->